Supporting Publications – LAE Conference

ISSN: 1662-9507

Scope of the journal

DDF publishes up-to-date scientific research and applied aspects in the area of formation and dissemination of defects in solid materials, including the phenomena of diffusion. In addition to the traditional topic of mass diffusion, the journal is open to papers from the area of heat transfer in solids, liquids and gases, materials and substances.

Major indexing sources

SCOPUS

Note: To know about complete indexing, please visit journal indexing page.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of DDF will be published with the publication fee of 150 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here .
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in DDF.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

SOLID STATE PHENOMENA (SSP)

ISSN: 1662-9779

Scope of the journal

SSP covers the fundamentals of the structures and their influence on the properties of solids, of experimental techniques and practical applications of materials, solid-state devices and structures in the context of the latest achievements in the area of research of solid state phenomena.

Major indexing sources

SCOPUS

Note: To know about complete indexing, please visit journal indexing page.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of SSP will be published with the publication fee of 150 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in SSP.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

MATERIALS SCIENCE FORUM (MSF)

ISSN: 1662-9752

Scope of the journal

MSF scope covers all aspects of theoretical, computational and experimental research in the area of materials science. It includes but is not limited to materials synthesis, analysis of materials properties,the technology of materials processing and materials application.

Major indexing sources

SCOPUS

Note: To know about complete indexing, please visit journal indexing page.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of MSF will be published with the publication fee of 150 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in MSF.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

KEY ENGINEERING MATERIALS (KEM)

ISSN: 1662-9795

Scope of the journal

KEM covers entire range of basic and applied aspects of the synthesis and research, modelling, processing and application of advanced engineering materials.

Major indexing sources

SCOPUS

Note: To know about complete indexing, please visit journal indexing page.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted paper under scope of KEM will be published with the publication fee of 150 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in KEM.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

ADVANCED MATERIALS RESEARCH (AMR)

ISSN: 1662-8985

Scope of the journal

AMR is a peer-reviewed journal which covers all aspects of theoretical and practical research of materials science: synthesis, analysis of properties, technologies of materials processing and their use in modern manufacturing.

Major indexing sources

UGC CARE JOURNAL

Note: To know about complete indexing, please visit journal indexing page.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of AMR will be published with the publication fee of 100 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in AMR.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

ADVANCES IN SCIENCE AND TECHNOLOGY (AST)

ISSN: 1662-0356

Scope of the journal

AST publishes about new materials research, development and application, its research, processing, and practical use in various areas of production and engineering.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of AST will be published with the publication fee of 75 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in AST.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS (JMNM)

ISSN: 2297-6620

Scope of the journal

JMNM is a peer-reviewed journal which is devoted to the rapid dissemination of recent high-quality research results concerning of metastable and amorphous materials, nanocrystalline and nanostructured materials, metallic glasses and nano-, microstructured hydrides and multicomponent (high entropy) alloys.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of JMNM will be published with the publication fee of 75 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in JMNM.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

ENGINEERING INNOVATIONS (EI)

ISSN: 2813-1002

Scope of the journal

EI is an open-access peer-reviewed interdisciplinary journal that highlights the latest scientific results on a wide range of modern development in various branches of engineering sciences. Along with the traditional fields of engineering studies, the journal Engineering Innovations also welcomes research articles with significant impact on engineering development related, but not limited to:

Research and development of innovative solutions in niche areas such as aerospace and aviation, nanotechnologies, communication engineering, digital technologies, high-tech production, bio-technologies, and biomedical engineering;
Progress in cutting-edge areas, such as the design of the technological and production systems, management of modern manufacturing, including supply chains, operations management, automated production, and digital manufacturing;
Sustainability and ecological compatibility of modern production: clean technologies in energetic, hydrogen and fuel cells in the energy transition, zero-carbon manufacture, deep waste recycling, technologies of environmental recovery, and water treatment, lean manufacturing;
Recent engineering approaches and solutions, and integrated projects related to construction, development of sustainable transportation and urban infrastructures, productive agro- and food production.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of EI will be published with the publication fee of 75 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in EI.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

ENGINEERING CHEMISTRY (EC)

ISSN: 2813-6535

Scope of the journal

EC is a peer-reviewed open access journal devoted to the most recent research and development concepts in chemistry, chemical engineering, and related topics. The journal aims to give scholars and commercial sector representatives worldwide a platform to present, discuss and promote their ideas, methodologies, or achievements.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of EC will be published with the publication fee of 75 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in EC.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

DIFFUSION FOUNDATIONS AND MATERIALS APPLICATIONS (DFMA)

ISSN: 2674-029X

Scope of the journal

DFMA is a new book series that evolved naturally from the journal Diffusion Foundations (DF). Its contents are intended to be in the form of extended papers and reviews that cover both the fundamental and applied aspects of mass transport and heat transport in solids, liquids and gases. Accepted topics in materials applications include: additive manufacturing, multiscale modelling, materials processing, nuclear materials, continuous phase transformations, light metals and alloys, composites, nanostructured materials, functional nanomaterials, electronic materials, energy and environment, biomaterials, corrosion.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of DFMA will be published with the publication fee of 75 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in DFMA.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

APPLIED MECHANICS AND MATERIALS (AMM)

ISSN: 1662-7482

Scope of the journal

AMM is a peer-reviewed journal which specializes in the publication of proceedings of international scientific conferences, workshops and symposia as well as special volumes on topics of contemporary interest in all areas which are related to:

Research and design of mechanical systems, machines and mechanisms;
Materials engineering and technologies for manufacturing and processing;
Systems of automation and control in the areas of industrial production;
Advanced branches of mechanical engineering such as mechatronics, computer engineering and robotics.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of AMM will be published with the publication fee of 75 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in AMM.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

ADVANCED ENGINEERING FORUM (AEF)

ISSN: 2234-991X

Scope of the journal

AEF is a peer-reviewed journal specialized in the publication of engineering-related papers. The journal is focused on the cutting-edge advancements, key achievements, innovations and innovative methods in engineering and applied technologies.

Instructions to authors

Authors have to submit original research/review articles directly to journal platform after their abstract acceptance (Login details will be emailed after abstract acceptance).
Each submitted paper will be peer-reviewed by at least two reviewers.
The peer-review process may take 3-6 months duration for final decision on paper after the conference days.
Each accepted article under scope of AEF will be published with the publication fee of 75 USD (Author need to pay publication fee only after the final acceptance of paper by the publisher).
To know about author guidelines and submission instructions, Click Here.
Each paper will be assigned with a unique DOI.
Merely article submission/presentation in the conference does not give guarantee to publish in AEF.
After the technical check by the publisher, author can not make any corrections or adjustments in paper.
The journal’s decision will be final regarding acceptance or rejection of submitted article.

INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN SCIENCE AND TECHNOLOGY (IJSRST)

ISSN: 2395-6011

Scope of the journal

IJSRST is a highly-selective journal, covering topics that appeal to a broad readership of various branches of science, technology and related fields.

Major indexing sources

UGC Approved Journal No. – 64011

Note: To know about complete indexing, please visit journal indexing page.

Instructions to authors

Authors have to submit original research/review articles on laescuelaeducation@gmail.com (Subject line: IJSRST Full Paper and Copyright Form along with Reference ID) after their abstract acceptance.
Each submitted paper will be peer-reviewed by at least two reviewers.
All accepted articles under scope of IJSRST will be published free of cost (Publishing cost is included in the conference registration fee).
Each paper will be assigned with a unique DOI.

Download IJSRST Paper Template